User's Manual

28
 Check that the device driver is properly installed. If the
driver is not properly installed, you will find a yellow
exclamation mark on the network icon by licking Start >
Control Panel > System > Device Manager > Network
Adapters.
If there is a yellow exclamation mark, please reinstall the
device driver with the system software Media.
The signal strength is excellent but cannot connect to the
network.
Solution: Check the TCP/IP properties are configured
properly. When you connect to an AP, click the Wireless
Network Connection icon on the taskbar and select the Support
tab.
Contacting Your Dealer
If you still have a problem after reading the preceding section,
the next step is to contact your dealer.
Your dealer can determine if the problem is something that
requires the computer to be taken to the shop. Before you call
your dealer, however, please have the following information
available:
Solution:
 How is your computer configured? Your dealer needs to
know what peripheral devices you are using.
 What messages, if any, are on the screen?
 What software were you running at the time?
 What have you done already to try to solve the problem? If
you have overlooked a step, your dealer may be able to
solve the problem over the phone.
What steps should be taken when water accidentally get
inside the UMPC
Solution:
 At this time be sure not to power on the UMPC or else it
will cause more serious damage to the computer