User Manual

X Malfunction of external memory or internal memory – an error will occur during saving
into the system memory, it will not execute normal operation
X External peripheral connected to the system not compatible – such as external USB
devices, compact flash, MMC, Smart Media are complicated devices will easily cause the
computer to enter standby mode thus unable to resume operation
X Un-suitable program or driver – any un-suitable driver could cause any extension file
like .dll, .sys and .exe would not allow the system to enter standby or hibernate mode
X Operating System loses effect – the power saving mode of Microsoft operating system
adopt ACPI mode (advanced Configuration and Power Interface), the power scheme will be
handle by the OS thus affecting the power saving mode of the system
Display problem
Problem: Display LED too bright or too dark
Solution:
Adjust the LED brightness, press the hotkey combination by brightness up or
brightness down
Problem: The whole image does not display on the screen Solution: This symptom
will occur if you are executing any program or playing games
design to run only on 800x600 resolution. Adjust the display to a higher resolution.
Problem: Can not execute any function
Solution:
X This only happens when the system is in hold status. Slide the power/hold switch to power
on, this time the charge LED indicator will lit thus allowing you to restart your computer
X If you are operating the computer using the battery, examine the battery charge status
Problem: The power switch is not operating Solution: This only happens when the system is in
hold status. Slide the power/hold switch to power on, this time the charge LED indicator will lit
thus allowing you to restart your computer
Operating System
X Windows XP Home
CPU
X Intel Diamondville platform Atom N270 533MHz FSB, 512KB, L2 Cache (1.6G)
Chipsets