User's Manual

17
Graphic Subsystem
Your computer uses a high performance 8.9 inch WUXGA/WSXGA panel with high
resolution and multi-million colors for comfortable viewing.
Audio Subsystem
Your computer’s audio subsystem is Sound Blaster Pro-compatible.
Adjusting the Volume Manually
 To increase the volume, press the FN + 4 combination keys in front panel of the computer.
 To decrease the volume, press the FN + 3 combination keys in front panel of the computer.
Voice Recording
A built-in microphone allows you to record sound. You will need to use audio processing
software to enable the built-in microphone. For example, you may use Microsoft Sound
Recorder.
Ethernet
Your computer is equipped with a 10/100/1000Base-TX Fast Ethernet network adapter.
Connect the active LAN cable to the RJ-45 LAN port located on the left side of the computer.
This allows you to access and transmit data in the local area network.
Connecting to the Network
Use Unshielded Twisted Pair (UTP) Ethernet cable only.
 Insert one end of the UTP cable into the network connector until the connector snaps
securely into the receptacle.
 Either connect the other end of the cable to an RJ-45 jack wall outlet or to an RJ-45 port on
a UTP concentrator or hub in the network.