Manual

Refer to Chapter 2 for Forms Loading.
For instructions on Bottom Feed Path, see page 2-4.
For instructions on Front Feed Path, see page 2-9.
After paper is loaded in printer:
1. Set the power switch to ON.
2. After the printer initializes, press the Load/Park key to load paper.
3. Set right and left margins. See page 2-8
CAUTION
IMPROPER MARGIN SETTINGS CAN LEAD TO PRINTHEAD DAMAGE!!
DO NOT PRINT OVER TRACTOR HOLES OR OFF PAPER EDGE.
4. Refer to Forms Thickness Adjustment on page 2-13 prior to operating printer.
CAUTION
IMPROPER FORMS THICKNESS ADJUSTMENT
CAN DAMAGE THE PRINTHEAD!!
1-13
Printer Self -Test