Owner manual

49
Cover Open
When the printer detects an open access cover, the following message appears
in the display:
To recover from this condition:
1. Close and lock the BIN 1 ACCESS DOOR.
NOTE: FAILURE TO FULLY LOCK THE BIN 1 ACCESS DOOR WILL
RESULT IN COVER OPEN WARNINGS.
Burst Err Zone 1
If the printer is unable to burst a coupon in ZONE 1, the following message
appears in the display:
To recover from this condition:
1. Unlock and open the BIN 1 ACCESS DOOR.
2. Slide the green ZONE 1 DOOR LATCH to open the ZONE 1 ACCESS
DOOR.
3. Clear the coupon from ZONE 1.
4. Firmly close and lock the ZONE 1 ACCESS DOOR (make sure the metal
latch is fully closed and engaged).
5. Close and lock the BIN 1 ACCESS DOOR.
6. Press the RESET/CLEAN key.
O n l i n e : C o v e r O p e n
C l o s e C o v e r t o C o n t i n u e
O n l i n e : B u r s t E r r Z o n e 1
P r e s s R E S E T t o C o n t i n u e