User`s guide

Page of 73 48

C. Cont. Mode

Press the and buttons to scroll the cursor to the sensor type. Press the

button to enter the black-mark sensor calibration mode.

C-1 Automatic

When enter the [Automatic] option, you will see following message and printer

will calibrate the sensor sensitivity automatically. When calibration process is

completed, the LCD screen will return to the previous menu.

C-2 Manual

In case “Automatic” sensor calibration cannot apply to the media, please use

“Manual” function to calibrate the sensor manually.

When enter [Manual] option, you will see following message. Please complete

there steps

Cont. Mode

Remove Label

Intensity

Ref. Level xxx

1. Remove the continuous label. Press the

button to set the value into the

printer.

Cont. Mode

Scan Paper

ntensity

Ref. Level xxx

2. Then, put the continuous label under the

Media sensor. Press the

button to

set the value into the printer.

Calibration 3/4

Bline Mode

> Cont. Mode

Exit

Cont. Mode 1/3

> Automatic

Manual

Exit

Cont. Mode

Automatic

Cont. Mode 2/3

Automatic

> Manual

Exit