Owner's manual

1.6 Install The Power Cord
1. Set the power switch to Off. (See Figure 1-4).
2. Install the power cord into the printer as shown in Figure 1-4.
3. Install the plug end of the power cord into a grounded AC outlet. A grounded
outlet must be used. Plugging the printer into an ungrounded outlet may result in
increased radio frequency noise generation, erratic printer operation, or electrical
shock.
4. Set the power switch to ON. The alarm will sound 3 short tones and the printer
will display:
1-9
CAUTION
CONNECTING THIS EQUIP-
MENT TO AN UNGROUNDED
POWER RECEPTACLE CAN
RESULT IN ELECTRICAL
SHOCK.
Paper Out: Main