Owner's manual

ESC C
NUL
Set forms length in inches when first variable is a null
ESC D Set horizontal tab
ESC E Select emphasized printing
ESC F Cancel emphasized printing
ESC G Select double-strike printing
ESC H Cancel double-strike printing
ESC I Enable/disable printing of characters stored in the lower control code area
(00hex to 31 hex).
ESC J Perform an immediate line feed of n/216 inch
ESC K Select normal density graphics
ESC L Select double-density graphics (half speed)
ESC N Set perforation skip to n lines
ESC O Disable perforation skip mode
ESC P Select/Cancel proportional printing
ESC Q Disable the printer
ESC R Reset tabs to default settings
ESC S Select Superscript or Subscript characters
ESC T Cancel Superscript or Subscript characters
ESC U Select/Cancel Unidirectional print mode
ESC W Select/Cancel Double-wide printing
ESC X Set left and right margin
ESC Y Select normal speed double-density graphics
ESC Z Select high density graphics
ESC [@ Select double-high printing
ESC \ Select Characters from All Characters table
ESC ^ Select a character from the All Characters table
ESC _ Select/Cancel overlining
SP Moves print position one character space to right
H-5