User`s guide

Using the Keyboard
Typewriter
Area
The non-character keys located in the typewriter area are
described below.
^
^
4-J Enter
l£
^ Shift
\L
\
The Backspace key is used to delete
characters. Pressing Backspace
moves the cursor one position to the left,
removing that character. The function of
the Backspace key may vary slightly,
depending on the software you are using.
The Enter key normally works like a
carriage retum, moving the cursor to the
start of a new line. The key also performs
"Enter" functions, instmcting the com-
puter to perfonn a specific command or
start a job.
Use either of the two Shift keys to enter
uppercase letters or to enter the symbol or
character shown in the upper position on
the keycap. In most application programs,
a Shift key may be used together with the
numeric keys to enter numbers when the
numeric keypad is in cursor control
mode.
\f ^
The Control (Ctrl) key is used with
another key or key combination to
perform a command or function. Instmc-
tions may be passed to WordStar® files,
for example, through Ctrl-key combina-
tions.
Note: To activate a Ctrl-key command, press
and hold down the Ctrl key first and
then press the second key.
Page 3-9