Quick Start Guide QG001010 TSL2585 TSL2585 EVM Miniature Ambient Light Sensor with UV and Light Flicker Detection v2-00 • 2021-Sep-13
Document Feedback TSL2585 ● TSL2585 EVM Content Guide Content Guide 1 Out of the Box................................ 3 2 Software Installation ..................... 4 3 Connect Hardware......................... 7 4 Start the Application ..................... 8 5 Uninstall Application .....................
TSL2585 ● TSL2585 EVM Out of the Box Document Feedback 1 Out of the Box For a detailed description of the TSL2585 EVM, please refer to User Guide: ● UG001017 Each TSL2585 Evaluation Kit comes with the following components: Figure 1 : Evaluation Kit Contents 1 4 2 3 No.
Document Feedback 2 TSL2585 ● TSL2585 EVM Software Installation Software Installation 1. Plug the flash drive into an unused USB port 2. Double-click the Setup.exe file on the flash drive, or click Start > Run and type E:setup.exe and press Enter. IMPORTANT: Use the appropriate drive letter in the above command to install the software. Flash Drive will commonly be assigned the next available drive letter for example C: hard drive, D: CD-ROM, E: flash drive 3.
Document Feedback Figure 4: Select Installation Folder Figure 5: Select Start Menu Folder Figure 6: Installation in Progress Figure 7: Information Screen Quick Start Guide • PUBLIC QG001010 • v2-00 • 2021-Sep-13 TSL2585 ● TSL2585 EVM Software Installation 9│5
Document Feedback TSL2585 ● TSL2585 EVM Software Installation Figure 8: Installation Completed Successfully Quick Start Guide • PUBLIC QG001010 • v2-00 • 2021-Sep-13 9│6
Document Feedback 3 TSL2585 ● TSL2585 EVM Connect Hardware Connect Hardware Plug the TSL2585 Daughterboard into the Controller board (Figure 1). Always use ESD procedures when handling the EVM. Using the enclosed USB cable, plug the micro-B connector into the EVM module. Using the other end of the cable, plug the USB A-connector into a USB port on the computer.
Document Feedback 4 TSL2585 ● TSL2585 EVM Start the Application Start the Application To start the application select ams-OSRAM > TSL2585 EVM > TSL2585 EVM on the All Programs menu. The default installation directory depending on the device and the operating system you are using is: C:\Program Files\ams-OSRAM\TSL2585_EVM (Windows 32-bit operating systems) C:\Program Files (x86)\ams-OSRAM\TSL2585_EVM (Windows 64-bit operating systems) A different install path may be selected by the user during the install
Document Feedback 5 TSL2585 ● TSL2585 EVM Uninstall Application Uninstall Application To remove the software from your computer (Figure 9), select ams-OSRAM > TSL2585 EVM > Uninstall TSL2585 EVM or use the Windows Control Panel. Figure 9: Remove Installation Headquarters Please visit our website at www.ams.com ams AG Buy our products or get free samples online at www.ams.com/Products Tobelbader Strasse 30 Technical Support is available at www.ams.
