American Weigh Scales, Inc.
AMS-150 Manual Thank you for purchasing the American Weigh AMS150 slim scale. Please read all operating instructions carefully before use. This electronic scale is a precision instrument. With normal care and proper treatment, it will provide years of reliable service. Never load the scale with more than the maximum capacity. Overloading will permanently damage it! Avoid any exposure to extreme heat or cold. Your scale works better when operated at normal room temperature.
I. OPERATION Place scale on a stable flat surface to begin weighing. 1. Press [I/O] key. 2. Wait until “0.0” is displayed. 3. Put the object(s) on the weighing platform. 4. Using the [M] key, you can switch between the weighing units. II. TARE WEIGHING 1. Turn on scale as described above. 2. Place the “tare item” on the platform. 3. Press [T] and wait until “0.0” is displayed. 4. Add the “net-weight-item”. III. CALIBRATION Calibration is NOT necessary before first use.
properly. Please check the availability of weights at the store you bought your scale from. IV. TROUBLESHOOTING The primary reasons for inaccuracy or malfunction are low batteries, incorrect calibration, overload or operating on an unstable surface. Please keep this in mind and maintain and operate your scale properly. This scale is a precise instrument and must be handled with the utmost care and caution. [Display] Elimination of errors Nothing, Battery-Symbol, [lo] or [88888] Change the batteries.
Specifications Model Capacity Resolution Display AMS-150 150g / 5.3oz / 4.8ozt / 96.5dwt 0.1g / 0.01oz / 0.01ozt / 0.1dwt 4.5 - Digit Backlit LCD 2.25 x 2.625 100g 5 x 3 x 0.75 Calibration Weight (not Included) Platform Dimensions (inches) 0.
