User manual

System Menu
Automation Mode
This is used to turn the automation system on and off. When automation is off, all the automation functions in
Encore are unavailable.
ä
To start the Automation System click Automation Mode in the drop down System Menu or click the Automate
icon.
In both cases, a dialogue box will be displayed to select how to start up the Automation System.
ä
Click the radio button for the required option and click OK.
Reload last Mix
This reloads the most recently loaded Mix/Pass. The Restore Modes dialogue box will be displayed.
ä Click the required check boxes and click OK.
The mix and Mix/Pass Tree will be loaded. When this is complete, a dialogue box will be displayed to inform you
that the Tree has successfully loaded.
ä
Click OK.
Append current automation to last Mix
When a Mix/Pass is recorded, the automation data is initially stored in the Logic MMC's automation buffer.
When timecode stops then this is saved to the current Mix/Pass Tree automatically if the Keep Mode is set to
Auto.
If the Keep Mode is set to Manual then it is possible that an un-saved automation pass is stored in the
automation buffer. This option is used to save that pass as a new Mix/Pass that is added to the most recently
loaded Mix/Pass Tree.
The Mix/Pass is added to the tree at the last loaded Mix/Pass.
The mix and Mix/Pass Tree will be loaded. When this is complete, a dialogue box will be displayed, informing
you that the "Tree successfully loaded".
ä
Click OK.
ä
To stop the Automation System click the ticked Automation Mode option in the drop down System Menu or
click the Automate icon.
The automation system will be switched off.
The Client Information area will display Encore Automation Is Disabled.
The Label List will be cleared and no Play Pass number will be displayed.
System Menu Automation Mode
Issue 4 Page 18:1