User manual

Keyboard Shortcuts
The following list shows which keys can be used in place of pointing and clicking with the trackball.
Key Action
F2 Mute List.
F3 Fader Moves List.
F4 Custom Event List.
F5 Group Setup (MCS).
Ctrl+F5 MCS Preferences.
F6 Show Mix/Pass Tree.
F7 Filing.
F8 Preferences.
F9 MCS Locate.
F10 Timecode Options.
F11 Label List.
Esc Close dialogue box. Equal to clicking the Cancel button.
Alt-Backspace Undo changes to data in a dialogue box.
Tab Jump between fields in a dialogue box.
a, b, c, d, e or f Set currently selected Timecode field to value held in the Timecode Preset for the key pressed.
z Set currently selected Timecode field to zero.
Ctrl-k Capture current Timecode and store it in Preset A.
Ctrl-n New Mix Tree.
Ctrl-s Toggle the Safety Net on and off.
Ctrl-i Set Safety Net in point (i.e. start time) to the current timecode and switch on the Safety Net. This also sets the
Safety Net end time to the start time plus two hours.
Ctrl-o Set Safety Net out point (i.e. end time) to the current timecode and switch on the Safety Net.
Launching Encore Utilities
The keyboard has dedicated keys that are used to launch and switch between different Encore utilities, including
the main Encore screen.
The NEW LABEL key has the same effect as pressing a letter on the mini keyboard (when the main Encore screen
is in the foreground), and causes the Add Label Dialogue Box to be displayed. See Label List.
The FILING key displays the Filing screen that is used to load and save mixes, desk setups, I/O configurations,
snapshot files and user defaults.
The EQ/DYN key displays the EQ & Dynamics screen that gives a graphical representation of dynamics and EQ
curves.
The PATH EDITOR key displays the Path Edit screen that is used to change processing in the paths.
Using Encore Keyboard Shortcuts
Issue 4 Page 17:4
ENTER
4
5
78
9
6
0
1
+
.
-
2
3
DEL
INS
UNDO
END
GRAB
TIME
TIME
FROM TO
EQ/
DYN
PATH
EDITOR
DESK
EDITOR
ENCORE
I/O
MAN
NEW
LABEL
CANCEL
FILING
HELP