User manual

This can be toggled on and off as required for manual punch-in and punch-out, or the Safety Nets can be set

and used as automatic punch-in and punch-out points.

A typical use of Collect Touch is in making scene changes. The most common example of this is a telephone

conversation where the scene cuts from one participant to the other, requiring instant changes to the dialogue

to create the 'voice down a phone-line' sound.

Using Collect Touch

The intended operation of Collect Touch is summarised in the Collect Touch Structure diagram.

ä First set Collect Touch Scope with the first press of the COLLECT TOUCH key. Collect Touch is Locked for use

by pressing COLLECT TOUCH again. It can be toggled between Scope and Lock as required, or until Collect

Touch is terminated.

ä To terminate Collect Touch press the COLLECT TOUCH key again.

The LED above the Collect Touch key will cease to be illuminated. Collect Touch Scope and the settings in the

Buffers are retained until Scope changed or New Mix/Clear Mix Memory is executed.

Automation Collect Touch

Issue 4 Page 16:12

Collect Touch Scope

Fader on Channel 1,

EQ Band 1 Freq on Channel 2

Play Pass

Position

Fader variable,

EQ Freq variable

Buffer A

Fader @ -10dB,

EQ Freq @ 2kHz

Buffer B

Fader @ 0dB,

EQ Freq @ 5kHz

Toggle Collect Touch Key

Collect Touch Locked

Toggle

Buffers

A and B

(All Bus and

All Tape)

Toggle

Master

Touch

Isolate

Record