User manual

Tone and Slate
Tone Controls
Tone Panel Select Panel
Tone
ä To route the Tone output press and hold down the SELECT key on the TONE panel.
The alpha display on the SELECT panel will display TONE/SLATE.
ä Press the MAIN, GRP, AUX, CUE or EXT key on the SELECT panel for the required path types and press the
number keys as desired in the SELECT panel.
The LEDs in the keys for the selected destinations will be illuminated red.
Slate is also routed to the same destination.
Slate
The Slate is a fixed level, low frequency sine wave signal. The main use for Slate is for recording onto a track on a
multitrack machine so that a high pitched tone is heard during rewind or fast forward.
ä
To engage the slate oscillator press SLATE key on the TALKBACK panel.
The key LED will flash.
ä
If necessary, press the TO M'TRK key.
This will ensure that the slate is sent to all tape sends the Tracks are patched to.
The SLATE key is latched with the ON/OFF key on the TONE panel.
Tone and Slate Tone Controls
Issue 4 Page 12:1
TONE
TO
MTRK
TO
MAIN
ON/
OFF
SELECT
SELECT*
MAIN GRP
15
13
11
9
7
5
3
1
16
14
12
10
8
6
4
2
PFL
AUX
EXT
CUE
TONE/SLATE