User manual

Processing

Process On / Off keys turn the process (if present) on or off, without having to have the process currently

assigned to the strip. This is useful for auditioning processing.

The Process keys will call the process to the path (the internal LED will be lit green if the process is present).

Pressing the EQ key will show the Frequency and Level for the first 4 bands. Press the PAGE 2 key to show Q and

Shape. If there are more than 4 bands present, then bands 5-8 are selected using the FLTR / SCF / KEY key.

The FLTR SCF/KEY key shows Filter parameters, and Sidechain Filter or Key Input controls on pressing the PAGE

2 key.

Each press of the I/O & PAN key will toggle through available Inputs / Outputs. The first page shows current

port input (or output), trim, phase & delay. Press PAGE 2 to show port, trim and phase, plus the four pan

controls. If there is more than one output assigned to a path, the key becomes a three-state toggle. If ABW has

been assigned, this is also shown on this page.

Pressing the COMP/LIM key will show compressor controls. Limiter controls are selected with the PAGE 2 key.

Pressing the GATE/EXP key will show gate controls. Expander controls are selected with the PAGE 2 key.

Pressing the INS key will show insert ports plus trim and delay. It is possible to add trim and/or delay to both the

input and output ports. The PAGE 2 key only has a function if there is a second insert.

The Aux 1-8 key is used to show levels and on/off for auxes 1-4. Press the GAIN/BAL key to access Pre/Post and

Pan (if stereo). Press the PAGE 2 key (and GAIN/BAL) to show controls for Auxes 5-8.

The Aux 9-16 key is used to show levels and on/off for auxes 9-12. Press the GAIN/BAL key to display Pre/Post

and Pan (if stereo). Press the PAGE 2 key (and GAIN/BAL) to show controls for Auxes 13-16.

Pressing the ON/CLEAR key turns on or off the currently displayed process. The internal LED will be green if the

process is present, red if it is switched on.

The alpha window shows the currently selected process. As a logicator is touched, this display will change to

show which control is active. The value of that control will be shown in the alpha window adjacent to the

logicator itself.

Working With Signal Paths Processing

Issue 4 Page 4:6

FLTR

SCF/KEY

I/O

&PAN

COMP

LIM

GATE

EXP

INS

AUX

1-8

AUX

9-16

GAIN

BAL

MODE

ON/

CLEAR

PAGE