User manual

The LED above the RECALL SNAP key will flash.

To limit the data restored by the Snapshot click the Include check boxes for items not required in the

Snapshot System dialogue box.

The check boxes are:

Ports The port routing for paths (.e. which input and/or

output a path is digitally patched to)

Routing The internal routing between paths (e.g. Channels

to Tracks).

I/O The settings of controls on inputs and outputs (e.g.

input trim).

Auxes Auxiliary contribution levels.

Dynamics Settings of the Dynamics controls.

EQ Settings of the Equaliser controls.

Fader The Fader level.

Mic/Line Changes to mic.

These override the Scope set on the console surface. For instance, to restore the routing, un-check all the boxes

except the Ports and Routing boxes. Leave the console surface Scope at default (the whole console) and recall

the Snapshot.

The checked boxes are remembered upon each entry and exit to the snapshot screen.

To recall Snapshots double-click on the required Snapshot in the list in the Snapshot System dialogue box.

The Snapshot will be recalled according to the Scope and Include check boxes.

Select the required Snapshot number with the + and – keys on the keyboard.

Tools Menu Snapshot Scope

Issue 4 Page 24:44