User manual

ä
Set the controls to be reset and click Next.
The selected paths will have the selected controls reset to the current default values.
EQ & Dynamics
The EQ curve is displayed as a solid red area that shows the effect on the signal across the full frequency range.
Boost is shown above the centre line and cut is shown below the centre line.
The Dynamics curve is displayed as a thick red line that varies from the blue 'normal' line across the full signal
level range.
Both the curves and values are updated dynamically when changes are made to control settings on the console
surface and as individual elements are turned on and off.
ä
To change the set of EQ parameters displayed click the Band 1/4 or Band 5/8 radio button as required.
The EQ parameter value display also follows touch (e.g. if band 1 is adjusted, parameters for bands 1 to 4 will
be displayed).
ä
To change the path displayed press the Access key for the required path.
Tools Menu EQ & Dynamics
Issue 4 Page 24:36