User manual

Touch the required controls on the path that the ACCESS key was pressed for above.

Any controls for which there are settings in Default Manager can be selected. If the path is spread out by the AFU

function then all controls will be immediately accessible.

The list box in the capture Scope dialogue box will show the selected controls.

ä Click an item in the list and click the Remove button if a control is incorrectly selected and click on OK to

execute the capture.

Reset the Console with Reset Wizard

To reset controls on the console surface to the settings in Defaults Manager click the Reset Wizard button.

The paths page of the Reset Wizard will appear.

Using the path type radio buttons and the list of available paths, select the paths you wish reset controls on. A

selection of paths can be highlighted using click and drag. When the selection has been made, click Yes.

The controls page of the Reset Wizard will appear.

Tools Menu Defaults Manager

Issue 4 Page 24:35