User manual

Defaults Manager

Defaults Manager is used to set the default values for all controls that can be automated (e.g. the default

frequency for the first band of EQ). Different sets of defaults can be created, saved and loaded as required. The

current set of defaults is associated with the current desk setup (console configuration).

Defaults Manager is accessed from the Tools Menu, by clicking on the Defaults Manager icon or from the Filing

utility (see the System Menu chapter for Filing).

Setting Values in Defaults Manager

ä Click the up/down buttons at the end of a box containing a required parameter or click in the box showing

the value and edit it using the Encore keyboard.

ä To copy the current page of default settings to other path types click the Copy button and the Copy dialogue

box will appear.

Click the check boxes for the path types within each partition to copy the settings to and click OK.

To set values from existing control settings click the Capture button.

A dialogue box will appear requesting an ACCESS key to be pressed.

Press the ACCESS key for the path containing the required control settings and the dialogue box will be

replaced by the capture Scope dialogue box with the All (Current Page Only!) radio button selected.

Tools Menu Defaults Manager

Issue 4 Page 24:34