User manual

A dynamics element must be present to add Key Input and/or Sidechain EQ. When the Key Input or Sidechain
EQ is added it will attach to the first dynamics element. If the dynamics order is changed then the sidechain will
stay attached to the first dynamics element. If all dynamics are removed then the Key Input and Sidechain EQ
will be removed with the last dynamics element.
If a DRC (Dynamic Range Controller) is added then all existing dynamics will be removed automatically, and
vice-versa.
If more than 4 bands of EQ are assigned to a path then the sidechain elements and Filters are no longer
available in that path. EQ bands 5 to 8 have the same system defaults as EQ bands 1 to 4 respectively (i.e. band
5 is an HF band and so on).
Copy and Paste
The Copy and Paste functions allow the configuration of a path to be copied to other paths of the same type (e.g.
Channel to Channel).
ä
Select the required path of the same type, click copy and then the paste button.
The signal processing shown will change to the be the same as the source path.
ä
To paste the configuration to multiple paths of the same type click the Paste button before another path is
selected.
A list of paths will be displayed in the Multi-Paste Operation dialogue box with a check box next to each path
name.
ä
Click the check boxes for the paths to paste the processing to.
Port Routing in Path Edit
The Port Routing on the current path can be changed from within Path Edit. This saves having to close Path Edit
to run I/O Patching or use the console surface for I/O patching.
ä
To change the Port Routing click the Edit IO Porting button.
ä
Click the Inputs, Outputs, Insert 1 or Insert 2 radio button as required.
The current porting (if any) will be shown and the Input Port and Output Port selection boxes will become
available as applicable.
The Port Used By boxes show which paths are already using the selected port.
Tools Menu Path Edit
Issue 4 Page 24:13