User manual

ä
Use drag and drop between the Paths and Selected Paths In Stem boxes to remove and add the required
tracks to the Stem and click the Pan Macros button.
The Pan Designators Macros dialogue box will be displayed.
ä
Click the radio button for the required Stem format or select a user defined Macro and click OK.
The selected Macro will be applied to the Stem.
Saving Desk Setups
ä To save the Desk Setup click on the Save & Load button.
If it is a new Desk Setup a confirm Create Desk Setup dialogue box will be displayed.
ä Click on Yes.
The copy porting dialogue box will now be displayed (before the Desk Setup is saved or allocated).
This is displayed because it is the first time that the new Desk Setup has been saved. It allows the port routing
(I/O patching) to be re-used from the Desk Setup that is currently allocated on the console before it is replaced
by the new Desk Setup.
ä
Click the check boxes to de-select porting that is unwanted.
It is recommended the porting for Listens, Talkbacks, Films and Sels is copied. Not only does this retain the
output patching for the surround monitoring system, but also for system paths that are unlikely to change their
porting between Desk Setups. The porting can always be changed later on if desired.
For all Desk Setups (new and existing) a timer will be displayed while the Desk Setup is being saved and then
allocated on the console.
Tools Menu Desk Edit
Issue 4 Page 24:8