User manual

Configuring Individual Machines
ä
To configure an individual machine, right click on the machine.
The Machine Properties dialogue box will be displayed.
The dialogue box has two pages: one for properties and one for MCS parameters for the selected machine.
Machine Properties
The Machine Properties page shows the status of the selected machine, including the machine name and type.
The Machine Properties page has controls for changing the offset and track arming.
MCS Parameters
The MCS Parameters page is used to change settings for individual machines to optimise performance. The
machine name can also be altered (e.g. to identify machines of the same type).
ä
To change the machine name click in the Machine Name box, type the required name and click the Reset
Name button to change the name back to the default for the machine type.
ä
To change a parameter click the required parameter in either list box.
The parameter will be highlighted and a description will be displayed in the box beneath the parameter lists.
ä
Click the Edit Value button and type in the required value and press Enter.
Transport Menu Group Setup
Issue 4 Page 21:2