User manual

ä
Enter the required crossfade time in the xFade Time box.
Pass Selection is not currently implemented.
ä
To make the new Mix/Pass click on OK.
The data will be copied as selected and the Copy Path Data window will close. The new Mix/Pass number will be
shown as the current Play Pass on the main screen.
Erase Path Data
Used to delete automation data (fader moves, mute events, channel button events) from selected paths.
Path information can be erased over any period in timecode.
ä
To select the data to erase click on Erase Path Data in the Offline Editing Sub-Menu of the Automation Menu.
The Erase Path Data dialogue box will appear.
ä Click the Faders, Mutes, etc. check boxes to select which parts of the automation data to erase. At least one
item must be checked in the Include box.
ä Enter the xFade Time in the Splice Mode box.
ä
Enter the Erase From and Erase To times in the Set Times box either manually or clicking on Select from List
and selecting the times in the Start and End Times dialogue box.
ä
Click the Whole Mix button to set the start to zero and the end to 23:59:59:24 and click the required paths in
the Paths list (click the Select All button to choose all paths).
The selected paths will be highlighted.
ä
Click on Deselect All to deselect all paths.
ä
To create the new mix pass click the Erase button.
The Erase Path Data dialogue box will close and a dialogue box will appear confirming that a new Mix/Pass was
created. The new Mix/Pass is automatically selected as the Play Pass.
Automation Menu Erase Path Data
Issue 4 Page 19:3