User manual

Control Sensitivity
The Control Sensitivity page is used to select velocity sensitivity for different functions that can be assigned to the
Logicators.
Velocity sensitivity causes a control value to change slightly faster when a Logicator is rotated more rapidly.
Studio Information
This is used to set the name of the studio where the console is located. Contact information can also be
provided, if required.
The studio name is displayed in the title bar of the main Encore screen.
Mic Line Rack Control
The Mic Rack Control software can be started from either the Tools menu, or directly from the START/
PROGRAMS function.
The mic amp settings can be saved and recalled independent from the consoles filing system using the Save and
Load buttons that will launch a conventional Windows dialogue.
The sixteen buttons at the bottom of the screen show how many of the (maximum) sixteen racks are connected.
The red highlight bar round one of the boxes reflects the settings for the twelve inputs on screen.
The Gain to each input can be adjusted from 20dB to 75dB in 5dB steps. To set this, either click on the pulldown
menu for the required path and select the level from the list, or use the keyboard up and down arrow keys to
increase/decrease each input, using the Tab button to step to the next path.
Reset System
Reset System can be used to restart the console or Encore, or just shut down Encore.
Use caution when executing reset, the Mix/Pass Tree will be deleted. Save important Mix/Passes before
executing reset.
Force Desk Keep
Selecting this option performs the same function as pressing KEEP DESK on the console surface. There is no
dialogue box for this function.
Licence Number
This is used in Offline Encore only.
It is used to set and display the Licence Number for an offline installation. This option only needs to be used
once.
Exit Encore
Allows users to exit Encore in a controlled way.
System Menu Studio Information
Issue 4 Page 18:15