Service manual

Power Supplies
The power supply modules used in this equipment contain no user
serviceable parts. Dangerous voltages and energy levels are present and
may be of sufficient magnitude to constitute a risk of electric shock or
injury, therefore, in the interests of safety if any fault develops with a power
supply module contact your nearest AMS Neve Distributor or AMS Neve
Customer Support Department for advice.
The input voltage range and fuse rating are engraved on the equipment
label adjacent to the mains input.
Single PSU Assembly
Setup Procedure
ä
Check the power supply voltages are 5.1v & 12.1v at the backplane bus-bars and the
disk drive connector before fitting any cards. Adjust supply voltage as necessary.
Digital Service Manual
Issue 3 Page 65