Service manual

Important Note
Every effort has been made to ensure that the information supplied in this document is
accurate. However, no responsibility is taken for inaccuracies, errors or omissions. Neither
is any liability assumed for damages resulting either directly or indirectly from use of any
information contained within this manual.
This manual is not part of any issue system and will not necessarily contain up to date
material.
The information contained in this manual is subject to copyright restrictions and may not be
copied to a third party without the written consent of AMS Neve plc, the copyright holders.
-
Failure to follow these procedures and recommendations could
invalidate the manufacturer’s warranty.
-
Please note that modules, cards or cables should not be
“hot-plugged” (i.e. inserted or removed with the power on).
Hot-plugging can stress the interface components which may lead to
failure. Items returned for repair with this kind of damage are not
covered under warranty.
-
All front panels must be fitted to the racks to achieve the required
cooling. If the rack units are operated with the panels removed
overheating will occur and may lead to component failure not
covered under warranty.
-
When working on the system please observe the precautions for
handling static sensitive devices which are described overleaf.
Digital Service Manual
Issue 3 Page 1