Owner's Manual

EN-5
Button Tips
(regardless of the current mode) and begin
broadcasting the announcement at TA
volume level. After the traffic announcement
is over, it will return to the previous mode
andvolumelevel.WhenTAisturnedon,
SEEK,SCAN,AMSfunctioncan only be
received or saved when traffic program
identification (TP) code is received.
PTY function
Press and rotate the knob to select the type
of station INFO-SPORT-EDUCATE-DRAMA-
CULTURE-SCIENCE-VARIED-POPM-
ROCK M-EASY M-LIGHT M-CLASSICS-
OTHER M-WEATHER-FINANCE-CHILDREN-
SOCIAL-RELIGION-PHONEIN-TRAVEL-
LEISURE-JAZZ-COUNTRY-NATIONM-
OLDIES-FOLK-DOCUMENT-TEST-ALARM
REG on: AF function will implement the
regionalcode(ofthePI)andonlystationsin
the current region can be tuned automatically.
REG o󰀨: AF function will ignore the regional
code(ofthePI)andstationsintheother
regions can also be tuned automatically.
TA VOL mode
RotatetheknobtotoadjustTAVOL10-35.
VOL LAST/ADJ mode
RotatetheknobtoselectVOLLASTorADJ
mode.
InADJmode,rotatetheknobtoadjustS-VOL
5-30.
BEEP mode
Rotate the knob to select button beep sound
on or off.
SWRC function
(system wired remote control)
This function allows to control main functions
oftheradio(VOL-/VOL+/Source/SEEK+/
SEEK-/TuneMemory/BT-OFFhang off)in
USB/BT/A2DP/AUX.
To do so, you need a wired remote to connect
tothefemaleinput3.5,yellowconnectoratthe
back of the radio.
SWRC SET
Activate or deactivate the steering wheel
controls
SWRC (RESIST / PWM)
Allows you to select the signal mode of the
steering wheel controls:
>RESIST:chainofresistors
>PWM:frequency-100Hzat12Volts
CAN SET
Rotate the knob to choose:
> CANREMOTE:ON/OFF
>CANTEST:ON/OFF
>CANDisplayer:ON/OFF
MIC
InDefaultsettings,theMICSELis"REAR".
The micro cable is connected at the rear of the
radio, we advise you not disconnect the micro
cable in order to avoid losing it.
Onthenontimedisplaymenu:
1.
Press and hold [
] buttonmorethan2
seconds.
2.
Rotate the knob to select [EXPERTCONF
YES] , and press the knob to
enter
.
3.
Rotate the knob to select [BTSETUP ]
4.
Select[MICSEL] and rotate the knob to
select"FRONT".
Language
Language for the user interface of the device.
Onthenontimedisplaymenu:
1.
Press and hold [
] buttonmorethan2
seconds.
2.
Rotate the knob to select [EXPERTCONF
YES] , and press the knob to
enter
.
3.
Rotate the knob to select [LANGUAGE
SETUP], and press the knob to
enter
.
4.
Rotate the knob to choose english, french,
german, italian, spanish, dutch.