User's Manual

Amroad Technology Inc.
42
43
DB3100R VIDEO DOOR PHONE
Upgrade –Upgrade
This section allows you to upgrade firmware of DB3100R through network.
Item Descrition
Hardware Version This field shows hardware version number.
Software Version This field shows current firmware version number.
Language This field shows the language of speech announ-
ment.
Select Application
Pack
Press “Browse” button and select Application Pack
from your local disk.
NOTE: Application Pack and Software File should be
uploaded at the same time.
Select Software file You may press Browser button to pop up a File di-
alog box to select the location of the new firmware
that you wish to upgrade.
Upgrade After select the new firmware, you can press Up-
grade button to start the upgrading. You will see
progress bar showing the upgrade status.
WARNING: DO NOT turn o or disconnect the Eth-
ernet cable during upgrade, for it may cause serious
damage to this device.
RFID Module Ver-
sion
This field shows RFID Module version.
Restore Factory
Default
Press the Restore Default button and wait for system to restore its original factory default setting.
Figure 29: Upgrade