User's Manual

Amroad Technology Inc.17
MANUAL FOR SYSTEM INTEGRATOR
Connecting to Ground Wire
To prevent power surge and lighting strike from damaging DB3100R, Flush-Mounted Box should be connected to the ground wire
(earth wire) of the building. Connect the wire of DB3100R to Flush-Mounted Box as shown in Figure. Remember to tighten the screws
on both sides.
Figure 14: Connecting to Ground Wire
NOTE:
Flush-Mounted Box should be connected to the
ground wire (earth wire) of the building. Power
Switching for DB3100R should also be connected to
the ground wire (earth wire).
To prevent power surge and lighting strike from
damaging DB3100R.