User's Manual

Amroad Technology Inc.15
MANUAL FOR SYSTEM INTEGRATOR
4. Installing DB3100R Unit
Before installing DB3100R on the wall, Flush-Mounted Box should be first mounted on the wall firmly. The following diagram shows the
detail on how to install DB3100R Unit into Flush-Mounted Box.
Secure DB3100R Main Unit
to Flush-Mounted Box
by tightening four long
screws.
Then, attach Front Panel
by putting front cover on
DB3010R Main unit and
firmly press Front Panel to
snap into DB3100R Main
Unit. Lift Doorbell button
and use two short screws
to secure Front Panel.
NOTE:
Before securing DB3100R
Main Unit to Flush-Mount-
ed Box, you should have
connected Ethernet cable,
power wire, relay control
wiring.
Figure 12: The details on how to install DB3100R Unit