User's Manual

Amroad Technology Inc.13
MANUAL FOR SYSTEM INTEGRATOR
2. Secure Flush-Mounted Box on Steel Frame
Before attaching Plaster Board and grouting Foam
Concrete on the wall, it’s necessary to secure Flush-
Mounted Box on Steel Frame.
The heights of the Steel Bars for installing Flush-
Mounted Box are suggested as shown in Figure.
The height between the bottom of the Flush-Mounted
Box and oor is 141 cm. And the depth of the Flush-
Mounted Box is 47.2mm.
Use four Drill Screws to secure Flush-Mounted Box on
Steel Bars in the Steel Frame. At the same time, a bub-
ble level is used to ensure Flush-Mounted Box is level.
Figure 10: Secure Flush Mounted Box to Steel Frame