User's Manual

MANUAL FOR SYSTEM INTEGRATOR
A
MROAD TECHNOLOGY INC.
46
the default is DCHP.
 DHCP - If you wish to connect this device to a exist
network and get dynamic IP address from the DHCP
server, please select this one. You will see all other items
in this mode are grayed out. In most of cases, DHCP
Client is used for connecting LAN (Local-Area-Network).
 Static IP - If you wish to use fixed IP address to
connect to network, you may select this one. You may
get Fixed IP when you applying SIP service from carriers
or operators. You will see last 2 items for PPPoE are
grayed out. Please follow instructions below to setup
other parameters for Fixed IP.
 PPPoE - This selection is for connecting ADSL
modem directly. Your phone will trigger ADSL model to
connect to Internet automatically when you are dialing
phone number.
IP Address
You may fill in IP address here if Fixed IP is selected.
Subnet
Mask
You may fill in Subnet Mask address here if Fixed IP is
selected.
Default
Gateway
You may fill in default gateway address here if Fixed IP is
selected.
Primary
DNS
You may fill in primary DNS server address here if Fixed
IP is selected.
Secondary
DNS
You may fill in secondary DNS server address here if
Fixed IP is selected.
PPPoE
You may fill in PPPoE account ID or name here if PPPoE is