User's Manual

MANUAL FOR SYSTEM INTEGRATOR

Example of the wiring for Electronic Lock with Open Door Button

Here we show an example of the wiring for Electronic Lock

with Open Door Button. In addition to Electronic Lock and

Open Door Button, we use wires, Relay Board, Core End

Terminal, 2-pin and 5-pin Terminal Block to build circuit.

It’s necessary to connect with Ethernet cable and external

DC power. Also, you need to configure WEB UI as previous

section mentions.

If all above steps are correct, you can press Door Open

Button to trigger the Electronic Lock (open door).

For more detailed information, please refer to next page.