User's Manual

MANUAL FOR SYSTEM INTEGRATOR
60
Email Setting
DP3010R will take a picture after someone entering password, scanning RFID card, or nobody answering the Video
Door Phone DP3010R. You can disable or enable the following three items for system to send email with picture.
Trigger By Password After someone enters password, DP3010R will take a picture.
You can enable/disable the function for system to send email with picture.
Trigger By RFID After someone scans RFID card, DP3010R will take a picture.
You can enable/disable the function for system to send email with picture.
Trigger By No Answer Nobody answers the DP3010R for a specific time period, DP3010R will take a picture.
You can enable/disable the function for system to send email with picture.
System sending Email needs the related SMTP setting. SMTP is a relatively simple, text-based protocol. Input the
valid account number and password for the SMTP.
SMTP server Host name or IP address of the SMTP server for notification. e.g. smtp.gmail.com
SMTP port To specify the port of the SMTP server. If the field is empty, the default value is 25. The
“smtp.gmail.com” port is 587.
SMTP server Account
Input SMTP server Account.
NOTE: Just enter the local-part of the email address (ex, John123), and you don’t need to
enter the domain name (ex, @gmail.com)
SMTP server
Password
Input SMTP server Password.
TLS Set enable/disable for mail transmission that “Confirms Client to the Server identity”
action is needed or not. TLS (Transport Layer Security) is a network protocol that ensures