User's Manual

MANUAL FOR SYSTEM INTEGRATOR
58
Entrance Settings – Extensions
You may configure call services in this page:
ITEM DESCRIPTION
Called Party
Extension
Number
Fill in the extension number. When Door Bell
button is pressed, the device will dial to the
extension number. (The extension number or
group that is assigned by IP PBX.)
NOTE: In the Peer-to-Peer mode, you need fill
in the complete extension number and
IP address. e.g. 102@10.3.1.128
Called Out
Extension
Number
Fill in the extension number. When ALARM is
occurred, the device will dial to the called party
extension number. (The extension number or
group that is assigned by IP PBX.)
Called Party
Image
There are three options: Security, Reception, and Concierge.
The selected item will be displayed on the LED screen when the door
bell is pressed. The default is Security.
Keypad Input This item allows you to enable/disable Keypad Input Function by selecting Enable/Disable in
the drop-down menu.
Monitor Mode Select Enable/Disable Monitor Mode.
If Monitor Mode is enabled, resident can dial the extension number of the DP3010R to view
Figure 33: Extensions