User's Manual

MANUAL FOR SYSTEM INTEGRATOR

System Management Screens

To bring up System Management Screen, building management (or community management) press and hold (PW) button on

Home Screen for 10 seconds.

There are four functions included in the System Management Screen:

1. to Display IP & MAC Address

2. to Reset Device

3. to Switch to Static IP

4. Enable Alarm Sensor (Hidden Feature)

DESCRIPTION SCREEN

System Management Screen

To bring up System Management Screen, just press and hold (PW)

button for 10 seconds.

NOTE: 1. Press numerical keypad 1, 2, or 3 to bring up further

management screen. Or, you can press keypad 4 to enable

Alarm Sensor (Hidden feature without display screen.)

2. By default, Alarm Sensor is disabled. You need to enter

System Management Screen to enable it by pressing keypad 4.