Specifications

14 15
RECOMMENDED ACCESSORIES
DL248D Deluxe Test Leads Kit
(See Page 76)
RECOMMENDED ACCESSORIES
DL248D Deluxe Test Leads Kit
(See Page 76)
ELS2A AC Line Splitter
(See Page 18)
USB-KIT2 PC software and
connection kit
(See Page 79)
Clamp Meters
Clamp Meters
ORDERING INFORMATION
ACDC-3400 IND and ACD-3300 IND
CAT IV Clamp Meters
If an industrial or utility testing application demands a higher level of safety,
reach for these CAT IV rated Clamp Meters.
• Extra large jaws to accommodate wide wires
• Peak hold
• Audible continuity
• Auto and manual ranging
• Auto power-off
• Data hold
• Backlight
• Diode test
• True-rms provides accuracy and
dependability
INCLUDED ACCESSORIES: Deluxe carrying case, test leads, type-K
thermocouple (for ACD-3300 only), test leads, battery (installed), users
manual, type-K thermocouple (ACD-3300 IND only)
ACD-3300 IND
AC 1000A INDUSTRIAL CLAMP
ACDC-3400 IND
ACDC 1000A INDUSTRIAL CLAMP
FEATURE ACD-3300 IND ACDC-3400 IND
DC Voltage
660.0 mV, 6.600 V, 66.00 V, 660.0 V, 1000 V
AC Voltage
660.0 mV, 6.600V, 66.00V, 660.0V, 750V
AC Current
66.00 A, 660.0 A, 1000 A
DC Current
– 660.0 A, 1000 A
Resistance
660.0
Ω , 6.600 k Ω , 66.00 k Ω , 660.0 k Ω , 6.600 M Ω , 66.00 M Ω
Capacitance
6.600 nF, 66.00 nF, 660.0 nF, 6.600 µF, 66.00 µF, 660.0 µF, 6.6 mF
Frequency
66.00 Hz, 660.0 Hz, 6.600 kHz, 66.00 kHz, 660.0 kHz, 1.000 MHz
Continuity
•
Temperature
-30 ˚F
^
1832 ˚F (-35 ˚C
^
1000 ˚C) –
Accommodates Conductors
up to 2.0” (51 mm) in diameter
CAT IV Industrial Clamp Meters – Safety and performance for industrial, utility or outdoors environments
N10140
AC50A Leakage Current Clamp Multimeter
Great for applications requiring measurement of leakage and fault currents,
this clamp measures low AC current down to microamps.
• Min/Max control to see largest or smallest
values in a series of measurements
• Relative value measurement to determine
differentials
• Data hold to freeze measurement value on
the display
• Digital display with analog bargraph
• Auto power-off to save battery life
• Minimum Resolution 0.01mA
LH41A AC/DC Low Current Clamp Meter
Make precise low-current measurements with 1 mA resolution.
• Data hold
• Auto power-off
• Auto zero button to zero display for dc
ACD-16 TRMS-PRO Recording Clamp Meter
Need the perfect tool to troubleshoot a system? The ACD-16 TRMS-PRO
provides a full range of measurements, enhanced with data logging
capabilities, to catch what the eye can’t see.
• Data-logging of 5400 points
• Audible continuity
• Auto power-off
• Automatic polarity
• Low battery indication
• Data hold
•
Voltage overload protection fo r all functions
up to 600 V ac/dc
AC50A
COMPACT CLAMP METER FOR
LEAKAGE CURRENT
LH41A
AC/DC CLAMP 4/40A 1MA
RESOLUTION
ACD-16 TRMS-PRO
1000A DATA-LOGGING
CLAMP-ON MULTIMETER TRMS
INCLUDED ACCESSORIES: Carrying case, thermocouple, test leads,
batteries (installed), users manual
N10140
FEATURE AC50A LH41A
AC Voltage
400.0 V –
AC Current
40.00 mA, 400.0 mA, 4.000 A, 40.00 A, 60.0 A 4.000 A, 40.00 A
DC Current
– 4.000 A, 40.00 A
Resistance
400
Ω
–
Continuity
•
–
Accommodates Conductors
up to 1.2” (30 mm) in diameter up to 0.78” (20 mm) in diameter
FEATURE ACD-16 TRMS-PRO
True-rms
•
AC Voltage
600.0 V
DC Voltage
600.0 V
AC Current
40.0 A, 400.0 A, 1000 A
Resistance
999.9
Ω
Frequency
6.00 hz
^
600.0 Hz
Temperature
-58 °F
^
572 °F (-50 °C
^
300 °C)
Accommodates Conductors
up to 1.77” (45 mm) in diameter
N10140
N10140
For small conductors – Compact Clamps
For data logging – Recording Clamp Meters
INCLUDED ACCESSORIES: Batteries (installed), users manual, test leads (AC50A only),
carrying case (AC50A only)
ORDERING INFORMATION
For detailed specifications
go to www.Amprobe.com
ORDERING INFORMATION
For detailed specifications
go to www.Amprobe.com
DUAL RATED