Specifications
Temperature Adapters
76 77
DL243D
48” long silicone lead wires,
probe tips, alligator clips, spade
lugs, fold-out carrying case
DL248D
Same as DL243D plus spring
loaded crimp tips and red tip
length extender
MTL-90C
Silicone test leads with
alligator clips
TL245A
PVC insulated standard test leads
TL246C
Heavy duty silicone test leads with
attached extra-large alligator clips
TL244B
Heavy duty silicone leads: 48”
heavy duty test lead wire with
Ever-sharp probe tips plus
threaded alligator clips
Shrouded 90° banana plugs
TL35B
Standard leads: 40” PVC
insulated lead with standard
tips plus threaded large alliga-
tor clips, CE approved alligator
clips, 0.6” jaw, shrouded 90°
banana plugs, one red and one
black leads and clips
TL36A
Test leads with threaded
alligator clips
CAT IV / 600 V, CAT III / 100 V
TL1500
Heavy duty test leads
CAT IV / 1000 V, 1500V MAX
Accessories
Test Leads
Line Splitter
ACF-3000AK
3000 A Flexible Current Transducer
• For use with multimeters or any
instrument with AC milli-volt input
• Measures up to 3000 Amps AC
• Connects directly to an instrument
• Flexible head fits all, small conductors
and large bus-bars up to 7” in diameter
• Wide frequency bandwidth
(10 Hz
^
20 kHz)
CT235A
• AC/DC current clamp,1000 A (50/10 kHz),
mV out
put, 1.2” max conductor
CT237B
• AC/DC current clamp, 200 A (50/10 kHz),
mV output, .75” max conductor
CT238A
• AC/DC current clamp, 20 A (50/20 kHz)
Low current version
CT-600 AC/DC 600 A AC/DC
Clamp-On Transducer
• For use with multimeters,
oscilloscopes, power recorders or any
instrument with ac and dc milli-volt
input (1 mV ac per Amp)
• AC or DC Current measurement
up to 600 A
• Two ranges 100 A and 600 A
(millivolt output respectfully10 mV
and 1 mV per Amp)
• Wide frequency response 40
^
400 Hz
• Maximum jaw opening 1.33”
ACF-3000DM-A
Current Transducer
• Extends current range to 3000 A
• Flexible head fits all, small
conductors and large bus-bars
up to 7” in diameter
• Supplied with adapters for the
DM-II PRO and DM-II PLUS units
• Two measurement ranges:
30 A
^
300 A AND 300 A
^
3000 A
• Recommended one ACF-3000DM-A
f or single phase system and three
for three phase systems
DKTA-620, Single to dual
temperature adapter
• Accessory for multimeters and
clamp-ons with temperature
input
• Converts single temperature
input to a dual temperature
• Computes differential
temperature between probes
TC253B temperature adapter
• Add thermometer function to
any digital multimeter
• ˚F / ˚C switchable
• Uses Type K thermocouple sensor
• Includes Type K probe (TP255A)
• Range: -58 ˚F
^
1832 ˚F
(-50 ˚C
^
1000 ˚C)
• output 1 mV / ˚C
Current Transducers
Temperature Probes
ELS2A, AC Line Splitter
• Measures load current without splitting line cord
• Two measurement points, X1 and X10 for increased sensitivity
• Built-in voltage measurement jacks
• 115 V, 15 A
Accessories
DUAL RATED
MH101KA, Thermocouple
• Master probe handle for probes
• 5:1 expandable coiled extension wire
TP110KA, Type-K Temperature Probe
• Immersion probe tip
• Can be used with MH101KA
• 650 °C (1200 °F)
TP120KA, Type-K Temperature Probe
• Surface probe tip
• 650 °C (1200 °F)
• Can be used with MH101KA
• Specially designed to get true surface
temperatures
TP130KA, Type-K Temperature Probe
• Air/gas probe tip
• 650 °C (1200 °F)
• Can be used with MH101KA
• Specially designed with radiation sheath
TP255A, General
purpose type-K probe
• 200 °C (392 °F)
TP254A, Higher-temperature
immersion probe
• 1100 °C (2012 °F)
TPK-59,
Thermocouple
• Accessory for multimeters and
clamp-ons with temperature input
• Measures temperature from
-50 °F
^
600 °F
• Plugs directly to a meter without
additional adapters