Specifications

72 73
Battery Testers
INCLUDED ACCESSORIES: Users manual
N10140
FEATURE BAT-500
Maximum Battery Capacity
Up to 500 amp hours
Battery Type
Alkaline, Nickel-Metal Hydride (NiMH),
Nickel-Cadmium (NiCd),
Lithium-ion (Li-ion) and lead-acid batteries
DC Voltage
4.000 V, 40.00 V
Impedance
40 m
Ω , 400 m Ω , 4 Ω , 40 Ω
Data Capture Memory
500 data sets
Data Logging Memory
9600 data sets
PC Download
•
FEATURE BAT-100 BAT-200
Battery Type
9V, AA, AAA, C, D, 1.5V Button Type
Analog Scale
•
INCLUDED ACCESSORIES: Users manual, software manual, batteries, ac adaptor,
RS232C (to USB Bridge) cable, software CD, kelvin clips
N10140
• Comparator function to quickly access battery condition as Pass, Warning, or Fail
• Store up to 99 user program able settings for quick battery diagnostics
• Tests battery impedance to calculate its true life
• Works with most batteries: compact storage batteries, alkaline and lead-acid up to 500 Ah
• Resistance measurement up to 40 ohms, and voltage up to 40 V
• Simultaneously measure battery resistance and voltage
• Compact and lightweight
• For trending/life cycle analysis download test results to a PC
BAT-500 Battery Tester
Here’s the quick, accurate way to test back-up batteries and UPS systems without
taking the batteries off line.
• Easy-to-read color-coded display with “Good”, “Low” and “Replace/Recharge” indicators
• Tests standard and rechargeable batteries: 9V, AA, AAA, C, D, 1.5V Button Type
• Compact design
• Ergonomic battery holder
BAT-100 and BAT-200 Battery Testers
Battery failure is one of the most common causes for sensor or instrument
failure. These portable universal battery testers make checking batteries
simple.
Battery Testers – Check the batteries!
BAT-100
BATTERY TESTER
BAT-200
BATTERY TESTER
BAT-500
BATTERY IMPEDANCE TESTER
Component Testers
• Dual zero adjustments pots to null strays and test leads
• Special “low ohms” range
• “Zero adjust” pots for low ohms and capacitance ranges
• Low battery indication
N10140
• Plug-in test slots and test leads with threaded alligator clips for precision testing
• Data hold and max hold
• “Zero adjust” pot for ohms
• Low battery indication
• Auto power-off
LCR55A Capacitance Tester
The ultimate electronic component verifier measures inductance, capacitance,
resistance, transistors, diodes and microwave diodes.
CR50A Inductance, Capacitance and Resistance
Tester
Inspect and verify components for quality control by quickly checking circuits
with this full-range capacitance and resistance meter.
INCLUDED ACCESSORIES: Users manual, test leads with alligator clips, battery (installed)
CR50A
CAPACITANCE/RESISTANCE
METER
LCR55A
LCR METER WITH TRANSISTOR
TEST
Component checks made easy – Handheld Component Testers
FEATURE CR50A LCR55A
Resistance
20 Ω , 200 Ω , 2 k Ω , 20 k Ω , 200 k Ω ,
2 M
Ω , 20 M Ω
20 Ω , 200 Ω , 2 k Ω , 20 k Ω ,
2 M
Ω , 20 M Ω
Capacitance
200 pF, 2000 pF, 2 µF, 20 µF, 200 µF, 2 mF, 20 mF 200 pF, 2000 pF, 2 µF, 20 µF, 200 µF, 2 mF
Inductance
- 200 µH, 2 mH, 200 mH, 200 H
Transistors
- Hfe, Iceo (NPN, PNP)
Diodes
•
Std (3 V) & microwave oven (8 V)
Continuity test
•
ORDERING INFORMATION
For detailed specifications
go to www.Amprobe.com
ORDERING INFORMATION
For detailed specifications
go to www.Amprobe.com
N10140
• Uses light 22 gauge wire, saving the time and expense of pulling Romex or armored cable
• Simplifies wiring – no need to wire back to separate low voltage transformers
• Operates silently so you can install relays at the fixture instead of at a remote location
R-115S Momentary switch relay (3-wire)
RC-120S Closet light relay (2-wire)
When you need low-voltage control circuits for safe operation in industrial
and process control environments, choose these low-voltage relays with
built-in transformers. Each unit operates independently, so you can install
one relay and operate it with as many switches as needed or control multiple
relays with a single switch.
Economical, low-voltage switching – Relays
FEATURE R-1155 RC120S
AC Voltage
105 V
^
125 V
AC Current
Up to 6.5 A (1/4 HP max motor load at 120 V)
Frequency
60 Hz
Safe control switching, maximum
10 V dc 10 milliamps
NEW