Specifications
40 41
Wire Tracers
Advanced Wire Tracers – A faster, easier way to trace
AT-4000CON
ADVANCED WIRE TRACER SERIES
AT-4001CON
ADVANCED WIRE TRACER WITH
SOFT CASE
AT-4003CON
ADVANCED WIRE TRACER WITH
HARD CASE
AT-4004CON
ADVANCED WIRE TRACER WITH
HARD CASE AND CLAMP-ON
ATTACHMENT
AT-4005CON
ADVANCED WIRE TRACER WITH
HARD CASE, CLAMP-ON
ATTACHMENT, BATTERY BOOSTER
AND CHARGER
• One universal transmitter automatically switches to trace energized and non-energized
(open, broken) wires
• Receiver is not position-sensitive ––get accurate readings without rotating
• Locates breakers, neutrals, and ground lines
• Locates and traces wires in walls, floors, conduit, and computer cables
• Pinpoints shorts, ground faults and broken wires
• Performs tests without having to interrupt power
• Does not interfere with sensitive electronic equipment
• Precise sensitivity adjustment
• Battery booster strengthens signal for open tracing
• Clamp-on attachment injects signal for non-contact operation
AT-4000 Series Advanced Wire Tracer
Amprobe invented wire tracer technology decades ago and continues to set
the standard today. The most advanced of all wire tracers, the AT-4000 Series
combines the technology, features and functions to make wire tracing fast
and precise.
SPECS RANGE
Transmitter operating voltage
9 V - 600 V AC/DC
Operating frequency
32.786 kHz
Receiver short mode range and open mode range
20’ in air from the traced wire under test conditions
KIT CONTAINS:
AT-4001CON AT-4003CON AT-4004CON AT-4005CON
Carrying Case
Soft
SV-1000
Hard
CC-AT-4000
Hard
CC-AT-4000
Hard
CC-AT-4000
Receiver R-4000 CON
• • • •
Transmitter T-4000
• • • •
110V Pigtail - Banana Plug Cord Set C2901
• • • •
Alligator Clip – Banana Plug Cord Set C2902
• • • •
Grounding Test Lead 25-ft. MTL-G
• • • •
Alligator Clip for Ground Lead VRC-320
• • • •
Clamp-on Transmitter Accessory A2202
- -
• •
Rechargeable Battery Pack B2024
- - -
•
Battery Pack Recharger B2025
- - -
•
Users Manual
• • • •
FEATURES
AT-4001CON AT-4003CON AT-4004CON AT-4005CON
Traces energized wires without power interruption.
Locates breakers without power interruption.
• • • •
Traces unenergized wires (wire continuity and wire
grounded at the end). Pinpoints shorts and ground
faults.
• • • •
Traces unenergized open wires (broken or discon-
nected wire). Pinpoints place where wire is broken.
• • • •
Supplied with clamp-on attachment to inject signal
without making contact with bare wire.
- -
• •
Supplied with Battery Booster to strengthen signal
for open tracing.
- - -
•
FEATURES AT-2004 AT-2005
Traces energized wires without power interruption.
Locates breakers without power interruption.
• •
Traces unenergized wires (wire continuity and wire grounded
at the end). Pinpoints shorts & ground faults.
• •
Traces unenergized open wires (broken or disconnected wire).
Pinpoints place where wire is broken.
• •
Supplied with clamp-on attachment to inject signal
without making a contact with bare wire.
• •
Supplied with battery. Booster to strengthen signal
for open tracing.
-
•
KIT CONTAINS: AT-2004 AT-2005
R-2000 Receiver
• •
S-2600 Transmitter 9-600 V
• •
T-2200 Transmitter for open tracing
• •
Clamp-on Transmitter Accessory A2201CE
• •
B2024 Rechargeable Battery Pack
-
•
B2025 Battery Pack Recharger
-
•
C2901 Cordset 110 Volt Plug to Banana Plugs
• •
C2902 Cordset Alligator Clips to Banana Plugs
• •
Users Manual
• •
Wire Tracers
41
• Trace energized lines up to 300 V ac or V dc
• Trace unenergized and open conductors
• Identifies breakers and fuses without powering down
• Locates shorts
• Identifies wires in a bundle
• Identifies control, alarm and telephone system wiring
• Traces coaxial cable shield
• Receiver range 1 to 3 feet from a cable being traced
AT-1000 Wire Tracer
For basic applications where accuracy and routine troubleshooting are
important, choose Amprobe’s first-tier circuit tracer.
INCLUDED ACCESSORIES: Users manual, batteries (installed), transmitter, receiver, connection cables, carrying case
FEATURE AT-1000
Trace energized lines up to 300 V ac or V dc
100 V
^
125 V ac (X1000 Transmitter)
Range 1-3’ from a cable being traced
R1000 Receiver
A faster, easier way to trace – Wire Tracers
• Traces unenergized and open (broken) wires
• Locates breakers, neutral and ground lines
• Locates and traces wires in walls, floors, conduit, computer cables, etc.
• Pinpoints shorts, ground faults and broken wires
• Does not interfere with sensitive electronic equipment
AT-2000 Series Wire Tracers
Without interrupting power, you can trace live wires buried or hidden behind
walls up to 13 feet deep.
AT-2004
ADVANCED WIRE TRACER
AT-2005
ADVANCED WIRE TRACER
AT-1000
ADVANCED TRACER
ORDERING INFORMATION
For detailed specifications
go to www.Amprobe.com
ORDERING INFORMATION
For detailed specifications
go to www.Amprobe.com