Specifications

34 35
Electrical Testers
FEATURES VP-440 VP-600SB
AC Voltage Detection
100 V
^
1000 V 100 V
^
600 V
Indicator
Lights Lights, Beeps and Vibrates
Safety Rating
CAT III 1000 V CAT III 600 V
FEATURE HV231-10A
Input Resistance
1000 M
Ω
Division Ratio
1000:1
Maximum Working Voltage
40 kV DC or AC peak
28 kV AC RMS
VP-440 & VP-600SB Non-Contact Volt Probes
®
Designed for safe, non-contact voltage detection, these voltage probes don’t
require much budget or demand much space. They fit conveniently in a shirt
pocket, tool belt, or pouch.
• Safely check for ac voltages without disconnecting the electrical loads
• Test cables, circuit breakers, wall sockets, junction boxes, and fuses
• Completely insulated, with no exposed metal or conductive parts
• No current flow is needed for correct operation
INCLUDED ACCESSORIES: Users manual, batteries (installed)
HV231-10A High Voltage Probe
When you need to safely measure high AC or DC voltage, reach for this
specialty handheld probe.
• Extended voltage measurement to 40 kV
• Use with standard multimeters with 10 M
Ω input impedance
INCLUDED ACCESSORIES: Users manual
Non-Contact Volt Probes – Safe, economical troubleshooting
N10140
Electrical Testers
FEATURES ST101A ST102A
AC Voltage
110 V
^
125 V 110 V
^
125 V
GFCI
-
•
FEATURE PY-1A
AC Voltage
120 V, 240 V, 277 V, 480 V
DC Voltage
160 V, 330 V, 380 V, 480 V
FEATURE LAN-1
Cable Types Tested
10/100 base-T; 10 base-2; RJ45; AT&T 258A;
EIA / TIA 568A/568B; Token Ring
Continuity Maximum length
> 300 meters
Connector Types
RJ45, BNC
ST101A
SOCKET TESTERS
ST102A
SOCKET TESTER WITH GFCI
PY-1A
VOLTAGE TESTER
PY-11
CONTINUITY TESTER
LAN-1
LAN CABLE TESTER
Lights show you high voltage or continuity – Socket Testers
• Confirm proper wiring and operation of AC socket
• Easy-to-read lights indicate common wiring problems
• The trip test to confirm that GFCI protection is working properly (ST102A only)
• For use on 110-125 V AC
INCLUDED ACCESSORIES: Users manual
ST101A / ST102A Socket Testers
Quickly test sockets and confirm GFCI breakers are properly wired for
protection with the ST102A.
PY-1A Voltage Tester
For unenergized circuits, connect the PY-1A. The bulb lights when the circuit
test is completed.
LAN-1 LAN Tester
With quick, go/no-go tests, you can find opens, shorts and miswired cable
installations. You can either step through the test cable one at a time, or let
the unit automatically pulse through the pin-outs and display the results.
• Remote termination module tests installed cable on wall plate or patch panels
• Perform loopback test or remote test
• Buzzer sounds warning for error condition in cable
• Two sets of LED lights indicate source and test
• Maximum line length: 300 meters
INCLUDED ACCESSORIES: Users manual, batteries (installed), remote terminator, RJ45 to
female BNC cable, RJ45 to male BNC cable, RJ45 to RJ45 cable, Female BNC to Female BNC cable
N10140
INCLUDED ACCESSORIES: Users manual
N10140
VP-440 VP-600SB
VP-440 VP-600SB
PY-11 Continuity Tester
• Bulb lights when circuit is completed
• For use with unenergized circuits
ORDERING INFORMATION
For detailed specifications
go to www.Amprobe.com
VP-440
NON-CONTACT VOLT PROBE
VP-600SB
NON-CONTACT VOLT PROBE
WITH SHAKER AND BUZZER
HV231-10A
HIGH VOLTAGE PROBE
ORDERING INFORMATION
For detailed specifications
go to www.Amprobe.com