Specifications

30 31
Electrical Testers
30
Wiring Testers – Test wiring in seconds
INSP-3 Wiring Inspector
Just plug in this rugged tester and in seconds you can verify whether a
building’s wiring complies with electrical code, especially voltage drop under
load. Identify issues crucial to the safety and performance of an electrical
system such as splices, connections and conductor quality.
• Save time and money by testing more efficiently: a single large display shows all relevant
test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground
impedance). No scrolling or switching screens needed
• Find faulty wiring that needs repair without removing outlet cover plates or panel covers, including:
- Faulty splices and connections
- Incorrect wiring
- Undersized wiring
- Faulty GFCIs
- Faulty or incorrectly wired AFCIs
- Incorrect line voltage
- Poor ground quality
• Verify performance of electrical systems with user selectable 10,15 and 20 amp loads
• Flashing screen clearly indicates incorrect wiring or voltage drop test failure
• Test without tripping circuit breakers or blowing fuses
• Check grounding for safety and ability to support sensitive electronic equipment
• Measure fault currents
INCLUDED ACCESSORIES: Power cord, 9 V alkaline battery (Installed), users manual, carrying case
FEATURE INSP-3 BEST ACCURACY
Load:
Constant 10, 15 or 20 AMP
simulation regardless of line voltage
-
Operating Voltage:
95 VAC
^
140 VAC +/- 2 % + 2 digits
GFI Trip:
6.0 mA nominal to trip GFI,
30 mA to trip RCD
-
AFCI Trip:
Up to 8, 120 AMP pulses
within 1/2 second period
-
NEW
Electrical Testers
User-friendly troubleshooters for voltage and continuity – Voltage and Continuity Testers
FEATURE VPC-30 VPC-31
AC Voltage
24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 347 V,
480 V, 600 V, 1000 V
24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 347 V,
480 V, 600 V, 1000 V
DC Voltage
6 V, 12 V, 24 V, 36 V, 48 V, 60 V, 72 V,
110 V, 220 V, 380 V
6 V, 12 V, 24 V, 36 V, 48 V, 60 V, 72 V,
110 V, 220 V, 380 V
Continuity
• •
Built in Shaker
-
•
VolTect
™
Non-Contact
Voltage Detection
• •
LCD Display with Backlight
-
•
• Super-bright bi-color LEDs indicates safe and dangerous voltages (above 55VDC or 30VAC)
• LEDs indicate 10 levels of AC and DC Voltages:
- Volts (AC) 24, 48, 120, 208, 240, 277, 347, 480, 600, 1000
- Volts (DC) 6, 12, 24, 36, 48, 60, 72, 110, 220, 380
• Auto hold feature keeps LEDs illuminated to retain a reading for 10 seconds after leads are
disconnected
• Solenoid tester-like shaker indicates AC voltage presence
• Auto backlit LCD digital display for precise voltage measurements (VPC-31 only)
• VolTect
™
non-contact voltage detection
• Continuity buzzer and visual continuity indication (LED)
• Tests GFCI receptacles and breakers
• Automatically turns on and off for easy and quick measurements
• Automatically selects ac voltage, dc voltage or continuity
• Water- and dust-proof, IP65 design
• Standard detachable test lead for easy replacement with optional longer or specialized probe
VPC-30 and VPC-31 Voltage Tester
For live voltage and continuity checks, these rugged and easy-to-use testers
offer a built-in shaker with the same functionality and feel as older analog
solenoid testers. Yet, they provide full input protection to CAT IV 600V /
CAT III 1000V.
VPC-30
VOLTAGE & CONTINUITY TESTER
VPC-31
VOLTAGE & CONTINUITY TESTER
INCLUDED ACCESSORIES: Users manual, batteries (installed), test lead
DUAL RATED
NEW
ORDERING INFORMATION
ORDERING INFORMATION
For detailed specifications
go to www.Amprobe.com
INSP-3
WIRING INSPECTOR
ORDERING INFORMATION
For detailed specifications
go to www.Amprobe.com