Specification Sheet

ManualsBrandsAmprobe ManualsElectrical3086905 ACD-14 PLUS Dual Display Digital Clamp Multimeter with Temperature

Amprobe® Test Tools

www.Amprobe.com

Data Sheet

Display: 3-3/4 digits 4000 counts, dual LCD displays

Update Rate: 3 per second nominal

Polarity: Automatic

Low Battery Indication: Below approx. 2.4V

Operating Temperature: 0°C to 40°C (32°F to 104°F)

Relative Humidity: Maximum relative humidity 80% for temperatures up to 31°C (88°F)

decreasing linearly to 50% relative humidity at 40°C (104°F)

Altitude: Indoor operation below 2000m (6,562 ft)

Storage Temperature: -20°C to 60°C (-4°F to 140°F), < 80% R.H. (with battery removed)

Temperature Coefﬁcient: Nominal 0.15 x (speciﬁed accuracy)/°F @ 0°C - 18°C or 28°C - 40°C

(32°F -64°F or 82°F - 104°F), or otherwise speciﬁed

Sensing: Average sensing for ACD-14 PLUS

Power Supply: Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032).

Battery Life: 95 hours approx. (in DCV mode)

Power Consumption: 2.5 mA typical for ACD-14 PLUS

Low Battery Indication: Below approx. 2.4V (battery symbol appears in upper right)

Auto Power Off: After being idle for 30 minutes

APO Consumption: ACD-14 PLUS: 0.8µA typical except 25µA typical for temperature function

Safety: CE EN61010-1, EN61010-2-032 - Pollution Degree 2

Transient Protection: 6.5kV (1.2/50µs surge) for all models

E.M.C.: Meets EN61326

Overload Protections: ACA Clamp-on jaws: AC 600A RMS continuous “+” & “COM” terminals (all functions): 600VDC/VAC

RMS

Dimension: L190mm X W 63mm X H 32mm (L 7.48” X W 2.48” X H 1.25”)

Weight: 204 g (0.450 lb approx.)

Jaw opening &

Conductor diameter: 28 (1.1”) max

General Specifications

ACD-14 PLUS 600A Clamp-On Multimeter with Dual Display

DC Voltage

400.0 mV ± (0.3% rdg + 4 digits)

4.000V, 40.00V, 400.0V ± (0.5% rdg + 3 digits)

600V ± (1.0% rdg + 4 digits)

NMRR: >50dB @ 50/60Hz

CMRR: >120dB @ DC, 50/60Hz, Rs=1kΩ

Input Impedance: 10MΩ, 30pF nominal (1000MΩ for 400.0mV range)

AC Voltage [50Hz -- 500Hz] Average sensing

4.000V, 40.00V, 400.0V ± (1.5% rdg + 5 digits)

600V ± (2.0% rdg + 5 digits)

CMRR: >60dB @ DC to 60Hz, Rs=1kΩ

Input Impedance: 10MΩ, 30pF nominal

AC Current (Clamp-on) [50Hz / 60Hz]

40.00A ± (1.5% rdg + 8 digits)

400.0A ± (1.5% rdg + 8 digits)

600A ± (1.5% rdg + 8 digits)*

*Accuracy speciﬁed to 600A continuous.

Electrical Speciﬁcations 23°C ± 5°C (73°F ± 9°F) & < 75% R.H.

Function Range Accuracy

Summary of content (2 pages)

PAGE 1
Data Sheet ACD-14 PLUS 600A Clamp-On Multimeter with Dual Display General Specifications Display: Update Rate: Polarity: Low Battery Indication: Operating Temperature: Relative Humidity: Altitude: Storage Temperature: Temperature Coefficient: Sensing: Power Supply: Battery Life: Power Consumption: Low Battery Indication: Auto Power Off: APO Consumption: Safety: Transient Protection: E.M.C.
PAGE 2
Data Sheet ACD-14 PLUS 600A Clamp-On Multimeter with Dual Display Electrical Specification Accuracy (23 °C ± 5 °C & < 75% R.H.), cont. Function Max/Hold (AC Current only) Range Accuracy Specified accuracy ± 50 digits for changes > 25ms in duration Ohms 400.0Ω ± (0.8% rdg + 8 digits) 4.000kΩ, 40.00kΩ, 400.0kΩ ± (0.6% rdg + 4 digits) 4.000MΩ ± (1.0% rdg + 4 digits) 40.00MΩ ± (2.0% rdg + 4 digits) Open Circuit Voltage: 0.