Product Manual

10
2.4 SC-7000 Signal Clamp
(included with AT-7030, option for AT-7020)
The clamp accessory is used for applications
when there is no access to the bare
conductors. The clamp attachment enables
the AT-7000-T Transmitter to induce a
signal through the insulation into either
energized or de-energized wires. The
signal will travel through the wire in both
directions and into all the branches. This
transmission method will not damage any
sensitive electronic equipment connected to
the circuit.
JAW
HAND GUARD
JAW TRIGGER
INPUT LEADS WITH
BANANA PLUG
2. KIT COMPONENTS