Item Brochure

©2017 Amprobe
®
For detailed specications and ordering go to amprobe.com 6003703 CAmprobe
®
| [e-mail] | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
AT-7000 Advanced Wire Tracer
Specications AT-7000-R Receiver AT-7000-T Transmitter SC-7000 Signal Clamp
TFT LCD Color Display size
3.5 in (8.89 cm) 1.77 in (4.5 cm) –
TFT LCD Color Display Dimensions
2.76 x 2.07 in (7.01 x 5.26 cm) 1.1 x 1.38 in (2.79 x 3.51 cm) –
TFT LCD Color Display Resolution
320px x 240px 128px x 160px –
TFT LCD Color Display type
TFT LCD RGB x TFT –
TFT LCD Color Display
• • –
Backlight
• • –
mDDR
64 MB 64 MB –
FLASH memory
128 MB 128 MB –
Audio
95 dB – –
Operating Temperature range
0 to 120˚F (-17.77 ˚C to 49˚C) 0 to 120˚F (-17.77˚C to 49˚C) 0 to 120˚F (-17.77˚C to 49˚C)
Storage Temperature
-40 to 150˚F (-40 to 65.5˚C) -40 to 150˚F (-40 to 65.5˚C) -40 to 150˚F (-40 to 65.5˚C)
Operating Humidity
95% R.H max 95% R.H max 95% R.H max
Operating altitude
2000 m 2000 m 2000 m
Measurement Category
CAT IV 600 V CAT IV 300 V CAT IV 600 V
Transient protection
– 8.00 kV (1.2/50 uS surge) –
Pollution degree
2 2 2
Drop test
3.28 ft (1 m) 3.28 ft (1 m) 3.28 ft (1 m)
Power Supply
4xAA Alkaline battery
90-270 V AC/DC, 40-400 Hz
AT-7030: BR-7000-T: LI-ION, 7.2 V, 2.2 Ah
AT-7020: 6x AA Alkaline Battery
–
Power consumption
4xAA battery: 2W
AT-7030: BR-7000-T battery: 2W
AT-7020: 6xAA battery:2W
AC line voltage (Charging state): 10W
AC line voltage: 3W
–
Charging voltage (BR-7000-T)
– 85-270 V –
Charging duration (BR-7000-T)
– 16 h –
Power up time
30 s 20 s –
Non-Rechargeable Battery lifetime
9 h 9 h –
Rechargeable Battery lifetime
(BR-7000-T)
– 10 h –
Leakage current (non-rechargeable)
1.1 to 2.6 uA 6 to 14 uA –
Leakage current (rechargeable)
– 1.2 to 4 uA –
IP Rating
IP52 IP40 –
Sampling rate
6.25 kHz Signal: 62.5 kSPS
32.768 kHz: 256 kSPS
NCV: 62.5 kSPS
62.5 kSPS –
Signal Response
Audible beep, bargraph display,
numeric display
Numeric display –
Response time
Smart mode: 750 ms
Tip Sensor Energized: 300 ms
Tip Sensor De-Energized: 750 ms
NCV: 500 ms, Battery monitoring: 5 s
Voltage measurement: 1.5 s
Battery monitoring: 5 s
Instantaneous
Voltage Measurement
– 9-300 V, DC to 400 Hz –
Non-Contact Voltage (NCV)
90-600 V AC – –
LED Indicator
Green Flashing: Signal Detection
Red: Energized
OFF: De-Energized
Orange: Over voltage
–
Operating Frequency
Energized: 6.25 kHz
De-Energized: 32.768 kHz
Voltage measurement: 40-400 Hz
Energized: 6.25 kHz
De-Energized: 32.768 kHz
Energized: 6.25 kHz
De-Energized: 32.768 kHz
Acoustic Indication
1 kHz Piezo Buzzer – –
Range Detection (Open air)
– – –
Smart mode
Pinpointing: Around 1.97 in (5 cm) radius
Direction indication: Up to 5 ft (152.4 cm)
– –
TIP Sensor: Energized
Pinpointing: Around 1.97 in (5 cm)
Detection: Up to 22 ft (670.56 cm)
– –
TIP Sensor: De-Energized
Pinpointing: Around 1.97 in (5 cm) radius
Detection: Up to 14 ft (426.72 cm)
– –
NCV
Detection: Up to 4 ft (121.92 cm) – –
Current Output (Low) Energized
– 53 mA rms –
Current Output (High) Energized
– 92 mA rms –
Current output (Low)
with BR-7000-T Energized
– 53 mA rms –
Current output (High)
with BR-7000-T Energized
– 120 mA rms –
Voltage output (Low) De-Energized
– 60 Vp-p –
Voltage output (High) De-Energized
– 120 Vp-p –
Voltage output (Clamp) De-Energized
– 180 Vp-p –
Jaw Opening
– – 2 in (5.08 cm)
Fuse
– 3.15A, 600V MAX, SLOW 5X20MM –
Dimensions
10.92 x 4.43 x 2.55 in
(27.75 x 11.25 x 6.483 cm)
8.5 x 4 x 2.2 in
(21.59 x 10.16 x 5.59 cm)
8.2 x 3.2 x 1.68 in
(20.83 x 8.13 x 4.27 cm)
Weight
1.20 lb (0.544 kg) 1.30 lbs (0.593 kg) 0.648 lb (0.294 kg)