Item Brochure

©2017 Amprobe
®
For detailed specications and ordering go to amprobe.com 6003703 CAmprobe
®
| [e-mail] | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
Features AT-7020 Kit AT-7030 Kit
Traces Energized and De-Energized Wires
⚫ ⚫
Locates Energized and De-Energized Breakers
⚫ ⚫
Pinpoints Shorts and Opens
⚫ ⚫
Three Power Modes
• ”High” power mode for normal circuits
• ”Low” power mode for precision tracing in difcult areas
• ”Clamp” power mode provides a boosted induction signal via the signal clamp
⚫ ⚫
Two Frequency Modes for Optimal Tracing
• 6 kHz for energized circuits
• 33 kHz for de-energized circuits
⚫ ⚫
Signal Clamp (SC-7000)
• Clamp-on attachment for inducing signal into wires without access to bare conductors
(optional)
⚫
Smart Sensor
™
Quickly and easily determine the precise
direction and location of energized wires in
walls, oors and ceilings with the patented
Smart Sensor™. Combined with a fast signal
processor that measures small changes in the
detected signal multiple times per second, this
new technology provides unmatched precision
and ease of use for tracing energized wires.
Signal Clamp
When there’s no access to bare conductors, use
the SC-7000 signal clamp to induce a signal into
either energized or de-energized circuits for
wire tracing and load locating. The AT-7000-T
transmitter’s “clamp” mode provides a boosted 6
kHz signal through the clamp to further improve
accuracy and performance.
AT-7000-T Transmitter
Featuring three power modes “high”, “low”,
and “clamp” and two output frequencies (6kHz
and 33 kHz), the AT-7000-T incorporates the
best technologies available for optimal wire
tracing and breaker identication on both
energized and de-energized circuits. The AT-
7000-T automatically sets the frequency based
on detected voltage, and prompts the user to
set the power level based on their application.
The color TFT LCD screen displays the detected
voltage, frequency output and power mode.
Tip Sensor
The shape of the tip sensor allows tracing in
hard to reach areas, corners & tight spaces,
as well as precise circuit breaker and fuse
identication. By utilizing two different types of
antennas (inductive coil and capacitive), the tip
sensor enables optimal tracing results of both
energized and de-energized circuits, which are
automatically selected by operating mode.
AT-7000 Features and Functions
Tip Sensor
SC-7000
Signal Clamp
AT-7000-R
Receiver
Smart Sensor
™
AT-7000-R
Receiver
AT-7000-T
Transmitter
Power Mode
Buttons (High,
Low, Clamp)
The AT-7000 Advanced Wire Tracer is available in two feature-packed kits