Specifications

LittleBoard 800 Reference Manual 83
Appendix C Connector Part Numbers
The following table provides the connector part numbers, or the equivalent, and if applicable the ribbon-
cable part number, used as the mating connector to the referenced connectors on the LittleBoard 800.
All connectors use 0.100” (2.54mm) pin spacing unless otherwise indicated.
Table C-1. Connector and Manufacture’s Part Numbers
Connector Designation Pin # Mfg Part Number
J21 Fan 3-pin Molex Housing 22-01-2037
Pins 08-50-0114 (discrete wires)
Molex
AMP
Housing 09-50-8073
Housing 770849-7
J19 Power In
7-pin, 0.156"
(3.96mm)
Molex
AMP
Pins 08-52-0071 (discrete wires)
Pins 350980 (discrete wires)
MMT
PHYCO
Housing IDCA001-F0502GFT
Housing 1100-10NP
J3, J14 Video (CRT),
Utility 3
10-pin
Belden Flat Cable 9L28010
MMT
PHYCO
Housing IDCA001-F0802GFT-K
Housing 1100-16
J15 Utility 1 16-pin
Belden Flat Cable 9L28016
MMT
PHYCO
Housing IDCA001-F1002GFT-K
Housing 1100-20
J11, J12 Serial A & B 20-pin
Belden 9L28020
J26* Video (LVDS) 30-pin, 2mm Samtec TMM-115-02-L-D (See Note Below)
3M
Amphenol
Housing 3626-6600
Housing 812-1633-1118H
J13 Utility 2 24-pin
Belden Flat Cable 9L28024
MMT
PHYCO
Housing IDCA001-F1302GFT
Housing 1100-26NP
J16 Parallel 26-pin
Belden Flat Cable 9L28025
MMT
FCI
Housing IDCB-F1302GFT
Housing 89947-126
J9 Audio In/Out 26-pin, 2mm
Belden Flat Cable 2L28016
AMP
PHYCO
Housing 746285-8
Housing 1100-34NP
Belden Flat Cable 9L28034
J17 Floppy 34-pin
Molex
Samtec
Key Plug 15-04-0292
Key Plug PK-01
3M Housing 3417-7040
Belden Flat Cable 9L28040
J6, J7 Primary &
Secondary
IDE
40-pin
3M Key Plug 3435-0
Note: *The LVDS (J26) part number listed in this table is not the mating connector, but the component
used by Ampro to stuff the LittleBoard 800. The LVDS cable provided in QuickStart Kit is an
unfinished 25" long cable with one connector, which connects to J26 on the LittleBoard. Refer to this
web site (http://www.samtec.com) for mating connector information.