Specifications

Chapter 4 BIOS Setup
ReadyBoard 800 Reference Manual 71
Assign DMA 2 – [Disabled] or [Enabled]
* If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
* If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
Assign DMA 3 – [Disabled] or [Enabled]
* If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
* If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
Assign DMA 5 – [Disabled] or [Enabled]
* If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
* If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
Assign DMA 6 – [Disabled] or [Enabled]
* If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
* If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
Assign DMA 7 – [Disabled] or [Enabled]
* If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
* If another device in the system is using this DMA channel, then this field should be set to
[Disabled].