Specifications

Chapter 4 BIOS Setup
70 Reference Manual ReadyBoard 800
Assign IRQ 4 – [Disabled] or [Enabled] (Typically COM1)
* If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
* If another device in the system is using this IRQ, then this field should be set to [Disabled].
Assign IRQ 5 – [Disabled] or [Enabled]
* If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
* If another device in the system is using this IRQ, then this field should be set to [Disabled].
Assign IRQ 6 – [Disabled] or [Enabled] (Typically Floppy Disk)
* If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
* If another device in the system is using this IRQ, then this field should be set to [Disabled].
Assign IRQ 7 – [Disabled] or [Enabled] (Typically LPT1)
* If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
* If another device in the system is using this IRQ, then this field should be set to [Disabled].
Assign IRQ 9 – [Disabled] or [Enabled] (Typically unused)
* If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
* If another device in the system is using this IRQ, then this field should be set to [Disabled].
Assign IRQ 10 – [Disabled] or [Enabled] (Typically unused)
* If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
* If another device in the system is using this IRQ, then this field should be set to [Disabled].
Assign IRQ 11 – [Disabled] or [Enabled] (Typically ISA Bridge/Native IDE)
* If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
* If another device in the system is using this IRQ, then this field should be set to [Disabled].
Assign IRQ 12 – [Disabled] or [Enabled] (Typically PS/2 Mouse)
* If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
* If another device in the system is using this IRQ, then this field should be set to [Disabled].
Assign IRQ 14 – [Disabled] or [Enabled] (Typically Hard Disk)
* If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
* If another device in the system is using this IRQ, then this field should be set to [Disabled].
Assign IRQ 15 – [Disabled] or [Enabled] (Typically Hard Disk)
* If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play adapter.
* If another device in the system is using this IRQ, then this field should be set to [Disabled].
Assign DMA 0 – [Disabled] or [Enabled]
* If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
* If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
Assign DMA 1 – [Disabled] or [Enabled]
* If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
* If another device in the system is using this DMA channel, then this field should be set to
[Disabled].